VIS650 Manual Magnetic
.75 / .100Magnetic holding with a positive hold-down. Sizes 75 and 100 mm.
EDM Vises
Every vise in the range shares one principle: clamp downward at 45°, hold the workpiece against the table, and never let the wire touch the fixture.
Selection guide
Which vise fits your job?
| Your situation | Recommended model | Why |
|---|---|---|
| Small plate, 0–100 mm thick | VIS653 / VIS652 | Ultra-thin body keeps the wire path clear |
| General small parts, manual setup | VIS650 / VIS660 | Compact, single-body, quick to change |
| Heavy workpiece, high clamping load | VIS663 / VIS665 | Power or slow-travel drive, up to 12 kg |
| Clamping from above | VIS664 | Vertical clamping action with lock-down |
| Thin plate or profile workpiece | VIS666 / VIS667 | Right-angle jaws, two-step clamp for thin stock |
| Many different parts, few setups | VIS680 / VIS684 | X / Y / Z adjustment — re-centre without removing |
| Many profiles from one purchase | VIS668 | Combination kit with multiple clamping faces |
| Round stock | VIS655 | Maraging steel jig clamp, 0–50 or 0–100 mm |
Economic EDM Vises
Compact aluminium bodies — VIS650 to VIS662
VIS651 Manual Ultra-thin
.50Thin profile for slim, delicate parts. HRC 50–55 working faces.
VIS652 Ultra-thin
.50 / .75 / .100Fixed thin vise in three jaw widths for different plate thicknesses.
VIS653 Manual Ultra-thin
0–100 mmWide 0–100 mm opening with a workpiece-lift hold-down.
VIS660 Manual Vise
.50 / .100Stable front force body, 45° oblique downward clamping.
VIS661 Manual Slow Vise
VIS661Fine slow-travel approach for larger workpieces.
VIS662 Manual Vise
.50 / .75 / .100Single-body accuracy with a hold-down against lift.
VIS654 Manual Slow Wire
VIS654Robust manual vise, 5.9 kg, holds up to 8 kg.
VIS655 Wire-cut Jig Clamp
0–50 / 0–100SUS440 maraging steel clamp for round workpieces.
Power & Heavy-duty Vises
Higher clamping force — VIS663 to VIS667
VIS663 Power Vise
.100 / .150Power-driven, 45° oblique downward force, up to 12 kg load.
VIS664 Vertical Clamping
.100 / .150Clamps from above with a screw-holder lock-down.
VIS665 Manual Slow Vise
.100 / .150Two-pin lock-down, heavy duty, up to 10 kg load.
VIS666 Manual Right-angle
.25 / .30Pie-lock structure on the screw holder for quick clamping.
VIS667 Right-angle Vise
VIS667Two-step clamp for thin plate, usable left or right.
VIS676 Stainless Vise
1" / 1.5" / 2.0"Corrosion-resistant stainless steel in imperial sizes.
VIS677 Manual Stainless
1.5" / 2.0"Manual stainless vise for corrosive EDM environments.
VIS678 Stainless Tooling
15 – 40Metric stainless tooling vise in five sizes.
VIS679 Manual Tooling
20 – 40Manual stainless tooling vise for die-frame work.
Adjustable Vises
X / Y / Z adjustment — VIS680 to VIS686
VIS680 Adjustable Vise VIS680.100 / VIS680.160
The most important idea in the whole range. The vise attaches to the work stand once and the workpiece is then positioned in seconds — horizontally, vertically or in parallel — without removing the standard fastening accessories. Work speed increases because a new part no longer means rebuilding the setup.
- Three adjustment modes — horizontal (X), vertical (Y) and parallel (Z).
- Attach to the work stand once; reposition without dismantling.
- 0.2 mm leeway is provided to avoid interference with the wire guide after adjustment.
- Remove the substrate stopper if it obstructs the cut.
- Weight 5.4 / 7.8 kg; maximum load 10 kg.
| Size | A | B | C | D | E | G max |
|---|---|---|---|---|---|---|
| VIS680.100 | 270 | 170 | 32 | 32 | 60 | 100 |
| VIS680.160 | 350 | 170 | 32 | 32 | 60 | 160 |
Horizontal adjustment
Vertical adjustment
Parallel adjustment
VIS681 Manual Adjustable
.100 / .160Manual three-axis adjustable vise with quick-release attachment.
VIS682 Manual Adjustable
.100 / .160Compact version for smaller tables — 4.8 kg, 6 kg load.
VIS683 Adjustable
VIS683Heavy-capacity adjustable vise, 45° oblique clamping, 8 kg.
VIS684 Adjustable
.100 / .160Larger work-stand format, 10 kg maximum load.
VIS685 Adjustable Combination
VIS685Maraging stainless steel with a wide jaw range and accessories.
VIS686 Universal Base
VIS686Special bearings give fast horizontal centring of the workpiece.
Combination Vises
Multi-face kits — VIS668, VIS693
VIS668 Combination Right-angle Vise
VIS668A complete kit of right-angle clamping faces, blocks and screws. Strong, durable clamping with a wide jaw position range — one purchase covers square, stepped and profiled workpieces.
VIS693 Modular Jig Clamp
VIS693A split-fixture system used in pairs for die-frame work, allowing larger overall workpieces. Fast and convenient to operate.
Not sure which vise?
Send the machine model, the table centre distance and a drawing or photo of the workpiece. We will recommend a model from the standard range and quote it.